Vacuum heat sealer with external aspiration VACUTEK

Vacutek is available in two versions, manual (7914.340) and motorized (7914.345), which differ only in the automatism that closes the jaws to start the air extraction cycle and subsequent welding of the barrier bags.

The 7914.345 motorized Vacutek is furnished with a foot-pedal.

Furthermore, having the 7808.340 model it is always possible to switch to the 7914.345 motorized model using the special 7914.341 upgrade kit.

The advantages of Vacutek are:

1) it is possible to use both flat and textured bags

2) No danger for the operator with the motorized version

Unlike other motorized vacuum machines, the pressure exerted by the jaws moving is not sufficient to cause damage to the hands.

3) Wide jaw opening

Excellent visibility when the mouth is open (the jaws open up to 45° in both Vacutek versions. This allows the operator to insert the bag quickly and accurately.

Vacuum heat sealer with external aspiration

4) Little effort to start the cycle

Both Vacutek models can start the suction cycle by manually pushing the upper jawbone handle down. Once the cycle has started, it is not necessary to continue pushing. The force to apply on the handle to start the cycle is about 4Kg for the 7914.340 model, while it is about 400g (just use a finger!) For the 7914.345 model. Vacuum heat sealer with external aspiration

5) Starting by the pedal.

In the motorized version (7914.345) the cycle can also be started by pedal, with the advantage of having hands totally free.

Vacuum heat sealer with external aspiration

6) No maintenance

The vacuum pump is dry therefore it does not require any maintenance.

Seal length: 450mm

Vacuum pump: Dry 5 m³/h

Soldering jaws: 2x6mm

External dimensions: 490x390x220mm

Power supply: 220V/50Hz 600W

Noise: